Fubar 600

Tandy Walker's - Fubar 600, 67.9 inch, Electric, Scaled Up 1/2A

Wing Span 67.9in. Wing Area 600sq.in. Wing Loading 9.61oz/sq.ft. CG 81.6%. Motor Turnigy D3536/5 1450KV Outrunner. Battery Graphene LiPo 1000mAh 2S 65C. Prop 10 X 7e APC

Updated 18-Nov-2022

001 Tandy's Next RC Electric Project 001a Half A Fubar 375 - Tandys Next Speed 400 Project 002 Tandy's Next RC Electric Project 003 Wing Design and Drawings 004 Stab Design and Drawings 005 Full Size Wing and Stab Drawings 006 Elevator Size 007 Wing Ribs (Part 1) 008 Wing Ribs (Part 2) 009 Wing Ribs (Part 3) 010 Wing Laminated Spars 011 Wing Ribs (Part 4) 012 Dihedral and Polyhedral Angles 013 Wing Left Inner Panel Framing 014 Mating of Wing Tip and Inner Panels 015 Polyhedral Joint Bracing 016 Motor Arrival 017 Wing Tip Panel Spars and Shear Webs 018 Right Half of Wing (Part 1) 019 Right Half of Wing (Part 2) 020 Joining Wing Halves 021 Dihedral Joint Bracing 022 Front Spar and Wing Tips 023 Completing the Wings Center Section Planking 024 Completing the Wing Structure 025 Nose Length Considerations 026 Fuselage Side Drawing 027 Fuselage Right Side Framing 028 Joining Fuselage Sides 029 Fuselage Cross Members and Servos 030 Mounting the Servos 031 Motor Spacer 032 Completing the Firewall 033 Received Second Order 034 Landing Gear and Wheel 035 Laminating the Two Firewalls 036 Stab Framing (Part 1) 037 Stab Framing (Part 2) 038 Stab Framing (Part 3) 039 Elevator Framing and Hinging (Part 4) 040 Adding Stab Extensions (Part 5) 041 Adding Rib Doublers (Part 6) 042 Elevator Hinging Completion (Part 7) 043s Installation of Stab Attachment Blocks in Fuselage (Part 8) 043 Installation of Stab Attachment Blocks in Fuselage (Part 8) 044 Installation of Stab Saddle Blocks in Fuselage (Part 9) 045 Elevator Push Rod Partial Installation 046 Fin-Rudder Design and Framing 047 Fuselage Extension 048 Fin Integration with the Fuselage 049 Rudder Push Rod Partial Installation 050 Push Rod Exit Epoxy 051 Finishing Push Rod Exit Epoxy 052 Dorsal Fin, Fixed Rudder Extension, and Stab Saddle 053 Pylon Incidence Modification 054 Pylon Construction (Part 1) 055 Pylon Construction (Part 2) 056 Pylon Construction (Part 3) 057 Pylon Construction (Part 4) 058 2.4 GHz Futaba Receiver Installation 059 Firewall Installation 060 Framing Stab Tip Panels 061 Completion of Stab Tip Panels 062 Stab Tip Panel Tips 063 Wing Saddle Attachment to the Pylon 064 Fitting Wing Saddle to Wing 065 Cowl Construction (Part 1) 066 Cowl Construction (Part 2) 067 Cowl Construction (Part 3) 068 Cowl Construction (Part 4) 069 Pylon Alignment and Attachment to Fuselage Structure 070 First Weight and Balance Check 071 Receiver Switch Installation and Fuselage Top Rear Planking 072 Radio Hatch Cover (Part 1) 073 Radio Battery Pack Installation 074 Radio Hatch Cover (Part 2) 075 Radio Hatch Cover (Part 3) 076 ESC and LiPo Battery Hatch Cover (Part 1) 077 Connectors for Electrical Power Train Wiring Harness 078 Revision to ESC Wiring Harness 079 ESC and LiPo Battery Hatch Cover (Part 2) 080 Motor Cooling Air Provision 081 Prop & Covering arrival, Second Weight and Balance Check and Motor Run 082 Electronic Speed Control Installation 083 Covering the Stab and Elevators with UltraCote Lite 084 Motor LiPo Battery Pack Installation 085 Completing Fuselage Planking 086 Pylon Base Fillets 087 Third Weight and Balance Check 088 Tin Skids to Protect the Stab 089 Torsional Stiffening of the Wing Structure 090 Independent Mounting for 2nd LiPo Battery Pack 091 Covering the Wing With Transparent UltraCote Lite 092 Wing Trailing Edge Protector 093 Completing the Trim on the Wing 094 Fourth Weight and Balance Check with Ballast Weight Added 095 Preparations for Covering the Fuselage 096 Red Silk Fuselage Covering (Part 1) 097 Red Silk Fuselage Covering (Part 2) 098 Red Silk Fuselage Covering (Part 3) 099 Red Silk Fuselage Covering (Part 4) 100 Red Silk Fuselage Covering (Part 5) 101 Red Silk Fuselage Covering (Part 6) 102 Flat Hatch Covers 103 Clear Dope Coatings (Part 1) 104 Clear Dope Coatings (Part 2) 105 Installing Wing Keys 106 Hatch Cover Removal 107 Holding Fixtures for Spray Painting 108 My Revelation on Taps and Die Threads 108a Follow Up on Taps and Die Threads 109 Klass Kote Product Data Sheet 110 Spraying Klass Kote 111 Programming the Electronic Speed Controller 112 Final Assembly (Part 1) 113 Final Assembly (Part 2) with Weight and Balance Check 114 Project Summary 115 Preparations for Flight Testing 116 Preparations for Flight Testing 117 First Two Test Flights Addition to my Book on Fubars

Top of this page